Adjustable Paving Supports

IInStar adjustable plastic paving supports enable the paving slabs to be lifted off the roof surface thereby allowing for effective drainage between and beneath. Fine height adjustment is achieved by rotation of the head

The four lugs at the head of the support ensure uniform alignment and spacing of the paving slabs.

The “screw type” adjustment allows for fine height adjustment to accommodate roof slopes and irregularities in the roof surface.

With heights ranging from 35mm up to 220mm, paved deck areas can be laid flat even when substantial slopes have been incorporated in the underlying substrate.
With the potential of large cavities beneath the slab, pipes and cables can be stored beneath.
The supports comprise of three parts: a base, a height control ring and a threaded support upon which the slab rests. 

INSTALLATION

Installation of the paving is made simple by placement of the paving supports at each corner of each slab. The alignment lugs will ensure accurate spacing between slabs.
It is essential to ensure that the first row of slabs are laid carefully in line as these will act as a guide for each subsequent row. The paving supports will be held firmly in place by the weight of the preceding slab enabling quick and accurate placing of the next row.  

TECHNICAL DATA

Adjustable        Base             Head           Alignment pin    Alignment pin
Support.           diameter       diameter.     width.                 height.
35-50mm         205mm          110mm       3mm                    19mm

50-80mm         205mm          110mm       3mm                    19mm

70-120mm       205mm          110mm       3mm                    19mm

120-170mm     205mm          110mm       3mm                    19mm

170-220mm     205mm          110mm       3mm                    19mm

PLEASE NOTE: Check with your paving slab provider as to maximum permissible dimensions when supported only at corners by paving supports. Central/interim supports may be required.

FEATURES

Large weight bearing surface
Fine adjustment from 35mm up to 220mm
Constructed from weather resilient plastic
1400kg load bearing capacity

BENEFITS

Fast and clean application of paving system without mortar.
Uniform spacing between paving slabs.
Easy removal of slabs if required
Water drainage between and beneath paving
Labour saving
Safer walking surface without standing water.

-

Download this page as PDF click above