Your search returned the following results:

Pitch/Pipe Pockets Sealer Elotene DSN Self-Adhesive Total Vapour Barrier RedStar SBS Adhesive Primer GreenStar Hot Melt Primer Butylene Fleece Tape Insta Stik Roofing Adhesive 13.5kg Insta Stik Roofing Adhesive Wand and Hose Kit Insta Stik Roofing Adhesive 750ml Handy Can Polyurethane Foam Applicator Guns ​Insta Stik Roofing Adhesive Gun and Hose Kit​ Insta Stik Roofing Adhesive Contract Pack Insta Stik Roofing Adhesive Gun Cleaner A-Ped SR non-combustible aluminium adjustable paving/decking support Paving Riser Pedestal Extension 10mm ProfilDeck® Sub-frame System Access Adjustable Paving & Decking Supports Access SLH (Adjustable) Self Levelling Head Paving & Decking Supports Plastic Stackable Paving & Decking Supports Type P Perimeter Pad Plinth Clip Paving Riser Pedestal Extension 25mm Paving Riser Pedestal Extension 60mm Slope Regulator Vibration Damper Isolation Mat Servipak

Pitch/Pipe Pockets Sealer

CONTACT US

Product description

Pourable Sealer kit for Pitch/Pipepockets: 

  • Compatible with most substrates
  • High levels of adhesion
  • Flexible Tough and durable. Impact resistant
  • Cold liquid applied - no risk of fire during application
  • Exceptionally fast curing / rainproof times even at low temperatures. 
  • Simple application. 
  • Suitable for application at temperatures down to 0ºC / relative humidity up to 95%
  • Hydrolysis resistant. UV resistant
  • Solvent free. Isocyanate free

Recommendations

Drying time:

  • Rainproof: approximately 30 minutes
  • Can be walked on / next layer applied; approximately 45 minutes
  • Can be subjected to loads after approximately 1 hour

Note: Drying times will be slightly increased at lower temperatures and slightly decreased at higher temperatures.

Storage: 
Resin: Can be stored unopened in a cool, dry, well ventilated place above freezing and out of direct sunlight for at least 6 months in the original container. If the contents have been opened re-seal ensuring the lid is air tight Avoid direct sunlight on site. 
Filler: Can be stored unopened in a cool, dry, well ventilated place out of direct sunlight for at least 6 months in the original container. Avoid direct sunlight on site. 
Health and Safety
Refer to Safety Data Sheets and COSHH assessments.
Disposal information
Refer to Safety Data Sheets for recommended EWC waste codes.